Salt mist test box(SKY7001)
Summary:
This equipment reference GB10587-89 "salt spray test chamber technical conditions", according to GB/T2423.17 "electrical and electronic products basic experiment procedure Ka: salt spray test method and the equivalent GJB150, IEC, DIN, MIL, ASTM standards such as all kinds of salt spray test.
1. The studio is adjustable temperature: RT + 5 ℃ ~ 55 ℃;
2. The temperature fluctuation degree, plus or minus 0.5 ℃ or less;
3. The temperature uniformity: plus or minus 1.8 ℃ or less;
4. Precipitation of salt fog: 1 ~ 2ml / 80cm2 • h;
5. Spray mode: tower spray, with uniform distribution of natural settlement. Cycle, continuous selection;
6. The box is molded with epoxy glass steel, corrosion resistant, light weight and high strength;
7. The lid of the box is made of transparent plexiglass, which can be made from 100 pieces to 200. The condensation of the salt mist in the box will not drop directly onto the sample.
8. The nickel-chromium alloy heating wire is heated by the bottom and preheated with a jacket. The temperature in the box is uniform.
9. The use of saturating devices to make spray air free of impurities
