Dynamic bending test machine for wire and cable (two or three rounds)
Will:
The dynamic bending test machine of wire and cable is in conformity with gb5013-2008, gb5023-2008 standard requirements. Suitable for flexure test of rubber, plastic insulation and sheath soft wire for wire and cable production and research units;
Technical parameters:
1. Trolley stroke: greater than 1000 or minus 20mm
2. Car running speed: 0.33 plus or minus 0.05 m/s (two rounds) and 0.1m + 0.02 m/s (three rounds)
3. Suitable for sample length: > 7000 (mm)
4. The code: 0.5 ~ 9kg, 9 sets
5. 2 pulley diameter: 60, 80, 120, 160, 200 mm
6. Three pulley diameter: 40,45,50mm
7. Three rounds each turn 18 ° Angle
8. Test voltage: 220/380v adjustable
9. Test current: 0 ~ 35A adjustable (single phase, three-phase)
10. Work power: AC380V / 50Hz / 10A.