Lamp holder pressure test device based on IEC60598-2-02, GB7000.9-2008 standard in chapter 6.14 test demands and figure 2.

1. The scope of work: 10 35 n, n - by Jordan farmar moved to the corresponding scale, and lasts for 1 min.

2. The arm length: 300 mm;

3. The pedestal height: 40 mm;

4. Applying point: thrust from the lamp holder's insertion point 3 mm;

5. Including flat probe, the probe thickness of 0.5 mm, 8 mm wide, front end with radius of 4 mm;

6. Material: chrome steel surface.