This device is designed and made according to the relevant requirement of the standards of IEC60950-1, UL94, IEC60707, IEC60695-2-2,  ISO1210, etc. It is used for horizontal and vertical burning test of plastic material components on the electric equipment and appliances by testing extent of damage, linear burning rate and residual flame. The chamber enclosure adopts sprayed iron plate equipped transparent observation window and digital display meter.  It has the advantages of nice appearance, convenience operation, and reliable performance. It is suitable for plastic material components, engineering plastics and rubber materials of home appliances, lighting devices and electric products.
This equipment has two types. One is button type and another is touch screen type. The latter type adopts 7-inch PLC touch screen, specialized software to control and is equipped with remote controller.
Parameter:
1. Head of Bunsen Burner: inside diameter is 9.5mm±0.5mm,  length is approximate 100mm±10mm upward from the air entrance
2. Angle of the burner: 0~45°(manual adjustment, with scale)
3. Ignition ground plate: standard medical cotton
4. Gas supply: 98% standard methane gas or 37MJ/m3±1MJ/m3 natural gas or propane (provided by yourself)
5. Flame temperature gradient of gas: 100℃±5℃~700℃±3℃, test time: 44s±2.0s or 54s±2.0s or customized (should be verified by temperature calibration device)
6. Temperature calibration and verification device: controlled by imported instruments automatically, equipped with Φ5.5mm, 1.76±0.01g or Φ9mm, 10.00±0.05g copper head (optional)
7. Thermocouple used for temperature calibration and verification: imported, insulation, high temperature resistance and armored thermocouple of Φ0.5mm and K type (optional)
8. Testing time and burning time: 1~999.9s(digital display, can be preset)
9. Repetion burning times: 1~9999 times (digital display, can be preset)
10. Adopts automatic igniton device, so the test can be done automatically
11. Internal volume of chamber: 0.75m3(1m3 can also be choosen)
12. Overall dimension(L*W*H): 1330*730*1500mm
13. Chamber material: sprayed iron plate
14. Air vent: Φ100mm
15. Input power: AC 220V 50HZ 5A